Deskripsi
Jual OPW API Bottom Loading Coupler LYNX 850 VG USA, Jakarta – Indonesia
The LYNX Series combines all of the best features of API couplers in one device to provide a superior and effortless bottom loading experience. Featuring stainless-steel components and coming in at 19 lbs. (8.6kg), the LYNX Series coupler is impressive by any measure. From the moment you use LYNX, you will experience the extraordinary attention to detail and superior quality that enables LYNX to provide outstanding performance, advanced safety, ease of service and long life.
FEATURES
- Fast in-field replacement of the main seals, on or off the arm
- Quick and easy disassembly of entire coupler through U-pin design
- Automatic latching
- U-pin is secured when the TTMA flange is fastened to prevent the pin from coming out during service
- A variety of seals available to suit a range of applications
- Two operating handle sizes to suit customer preference
- Four “true-interlocking” stainless-steel latches ensure secure coupling and maximum safety
- High-quality components including a stainless-steel collar and hard anodized Aluminum body for increased service durability and life
- Nominal product leakage during disconnect increases site safety
- Low risk of leakage because of a proven seal design
- Ergonomic operating handle and carry loop results in less physical strain on users
SPECIFICATIONS
LYNX 850 VG = Short Handle (150mm) with Viton GFLT seal
- Handle Length: Short 5.9″ (150mm)
- Seals: Viton GFLT
- Max Working Pressure: 80 psi (5.5 bar) (550 kPa)
- Product Test Pressure: 119 psi (8.2 bar) (820 kPa)
- Design Pressure: 363 psi (25 bar) (2500 kPa)
- Max Surge Pressure: 493 psi (34 bar) (3400 kPa)
- Operating Temperature: Viton GFLT: -20°F to 140°F (-29°C to 60°C)
- Design Standard: API RP 1004 8th EDITION 2003 – Bottom Loading and Vapor Recovery; AS5602-2009
- Dismantling: Removal of one U-pin enables the shaft assembly and main poppet to be withdrawn
- Mounting: By industry standard 4″ (100 mm) TTMA Flange | 8 holes Ø7/16″ on 5.8″ PCD, 6.6″ outside diameter (Ø11 mm on 149 mm PCD, 168 mm OD) | Use spring washers when mounting coupler as per common industry practice
- Weight: 19 lbs. (8.6 kg.)
- Dimension: 18,1 cm x 29,4 cm
